LSM Taxanaha nooca is-qufulka isku xidha zinc alloy tuubada hawada pneumatic ku habboon
Sharaxaada Alaabta
1.Naqshadaynta is-qufulka: Xidhiidhiyayaasha taxanaha LSM waxay qaataan nashqad is-quful ah, kaas oo hubin kara isku-xidhnaan la isku halleyn karo oo deggan kana fogaanaya khatarta dabacsanaanta iyo daadinta.
2.Iska caabbinta daxalka sare: Isku-dhafka ka samaysan walxaha zinc waxay leedahay iska caabin aad u fiican oo daxalka ah waxaana loo isticmaali karaa waqti dheer deegaanno adag iyada oo aan la taaban.
3.Xidhiidhka degdega ah: Xidhiidhiyayaasha taxanaha LSM waxay qaataan naqshad isku xidhka degdega ah, kaas oo si weyn u wanaajin kara hufnaanta isku xidhka iyo kala-goynta, isla markaana kaydisa wakhtiga shaqada.
4.Cabirro badan oo la heli karo: Xidhiidhiyayaasha taxanaha LSM waxay bixiyaan cabbirro kala duwan si ay u buuxiyaan dhexroorka tuubooyinka iyo shuruudaha isku xirka.
5.Codsiga ballaaran: Xidhiidhiyeyaasha taxanaha LSM waxay khuseeyaan tuubooyinka oofwareenka, khadadka wax soo saarka warshadaha, qalabka otomaatiga ah, injineernimada farsamada iyo qaybaha kale.
Tilmaamaha Farsamada
Dheecaan | Hawo, haddii la isticmaalo dareere fadlan la xidhiidh warshadda | |
Cadaadiska shaqada ee ugu badan | 1.32Mpa (13.5kgf/cm²) | |
Xaddiga Cadaadiska | Cadaadiska Shaqada ee Caadiga ah | 0-0.9 Mpa (0-9.2kgf/cm²) |
Cadaadis Shaqo oo hooseeya | -99.99-0Kpa(-750~0mmHg) | |
Heerkulka deegaanka | 0-60℃ | |
Dhuumaha lagu dabaqi karo | PU Tube | |
Qalab | Zinc Alloy |
Qaabka | P | A | φB | C | L |
LSM-10 | PT 1/8 | 10 | 23.8 | 19 | 54.5 |
LSM-20 | PT 1/4 | 12.5 | 23.8 | 19 | 57 |
LSM-30 | PT 3/8 | 13 | 23.8 | 19 | 57.5 |
LSM-40 | PT 1/2 | 13.5 | 23.8 | 19 | 58 |